Dependable and easy to service, the Challenger
is Fluidart’s® best-selling filter. This efficient bead filter is
produced in five sizes to fit ponds up to 20,000 gallons.
Advantages include its tough fiberglass tank,
side-mounted multiport valve, and ease of installation
and maintenance. No need to disconnect plumbing to
access and service internal components.
The unique Hydra-Swirl design allows solids to be spun
to the center of the vessel where they stay until the
sludge drain is opened. Through the multiport valve, the
pump delivers a thorough backwash and rinse. With the
drain open and the pump running, solids are purged
under pressure, fully removing waste in a few seconds.
For backwash the Challenger series utilizes Hydra-
Thrust bead agitation, using forced air to agitate the
beads and free up trapped debris.
Other features:
- Pressurized filter
- Designed for minimal flow restriction.
- Two-inch plumbing throughout.
- 500-550 sqare feet of surface area per sqare foot of media.
- Can be used with or without a pre-filter.
Model |
Ft3 Media |
Ponds up to |
Valve Clearance |
Approx. Weight |
Dimensions |
A |
B |
C |
D |
40 |
1.75 |
2,500 |
13" |
116 |
34.75 |
21.5 |
11.875 |
36.75 |
50 |
2.5 |
5,000 |
13" |
150 |
34.75 |
21.5 |
11.875 |
36.75 |
60 |
4 |
10,000 |
13" |
220 |
35.50 |
24.5 |
13.625 |
37.50 |
100 |
6 |
15,000 |
13" |
325 |
39.75 |
30.5 |
16.25 |
41.75 |
140 |
9 |
20,000 |
13" |
470 |
45.25 |
36.5 |
18.75 |
47.25 |
